3CX hardware · Adelaide
The right 3CX IP phones make the difference between a system your team likes and one they put up with. 3CX publishes a list of phones it actively supports – mainly Yealink, Fanvil and Snom – and those are the models that provision themselves and update from the admin console. Here’s how to choose between desk phones, DECT cordless and softphones.

3CX sorts handsets into tiers, and the tier decides how much of the work 3CX does for you.
| 3CX tier | Brands | What it means |
|---|---|---|
| Supported (preferred) | Fanvil, Snom, Yealink | Vendors work with 3CX on firmware; phones auto-provision and can be firmware-updated from the console |
| Supported with limitations | Gigaset (DECT), Grandstream, Htek, Polycom, older Yealink T1/T2 and T4xG models | Can be provisioned with 3CX and worked when tested, but with less vendor co-ordination |
| Legacy | Older Avaya, Aastra, Cisco, Polycom, Snom, Yealink and Fanvil models | Manually configured only, no support – 3CX advises not to buy these new or second hand |
Within the preferred brands, current Yealink 3CX phones include the T3, T4 (S/U), T5 and T7/T8 series and the AX series; Fanvil covers the X series, V series and W-series Wi-Fi phones; Snom covers its D3 (including D1xx models), D7 and D8 series. Each has hotel and door-phone variants too. The list changes as models are released and retired, so we check it at the time of your order.
Our 3CX phone systems page notes that existing IP phones may be reusable. Here’s how we decide. If your phones appear in 3CX’s preferred or limited tiers and are on reasonably current firmware, we’ll usually reuse them. If they’re on the legacy list – for example Yealink T2x-P models, Cisco SPA or the Yealink W52P/W56P DECT – they can only be configured by hand, won’t get 3CX firmware updates, and 3CX gives no support. We’ll typically recommend replacing those, especially at reception.
Analogue phones, fax machines and door intercoms can often stay by adding an analogue gateway (ATA); 3CX lists tested Grandstream gateways for this. Your numbers stay on the same SIP trunk regardless of which handsets you choose.
Best for reception, sales and anyone on the phone most of the day. Larger screens and busy lamp field (BLF) keys show who’s on a call and transfer with one press. Colour-screen models such as the Yealink T5 series suit receptionists.
For warehouses, workshops, clinics and staff who move around. DECT runs on its own radio band, so it’s independent of your Wi-Fi. Supported options include Yealink W-series bases, Snom M-series and Gigaset N-series multicell systems for larger sites.
3CX’s apps for Windows, Mac, web, iOS and Android turn a laptop or mobile into an extension. With a decent USB or Bluetooth headset they’re all many hybrid workers need – and the cheapest option, because there’s no hardware.
Most offices end up with a mix. Note that the self-hosted 3CX Free Basic edition doesn’t support IP desk phones at all, so if hardware matters, budget for a paid edition – our 3CX pricing guide explains the tiers.
3CX lists Jabra and Yealink headsets as supported, with headset integration built into the apps so call control buttons work. For desk phones, a wireless DECT headset lets reception walk away from the desk mid-call; for softphones, a USB or Bluetooth headset with good noise cancelling makes the biggest difference in an open-plan office. We’ll recommend models that match the phone or app each person actually uses.
Provisioning is what turns a boxed phone into a working extension with the right name, number and keys. 3CX supports several methods:
With a cloud-hosted 3CX, office phones also need a router phone or a small session border controller on site to handle firewall and NAT traversal. Once provisioned, 3CX can mass-update Fanvil, Yealink and Snom firmware to versions it has tested, and admins can reprovision or reboot phones remotely. If you’re weighing hosted against on-premise, see cloud PBX and hosted phone systems.
Phones feed into the rest of the system too: click-to-call and screen pops from 3CX CRM integration work on desk phones as well as apps. To get a hardware recommendation for your office, contact our team.
Yealink is one of 3CX’s preferred vendors, so any current model on the supported list will provision and update cleanly. The T3 series suits general staff on a budget, the T4 S/U series is a common all-rounder, and the colour-screen T5 series suits reception. For cordless, the W-series DECT bases are supported. We match the model to the role rather than one size fits all.
Yes. Fanvil is one of 3CX’s three preferred vendors alongside Yealink and Snom, so its current X, V and W-series phones support automatic provisioning and console firmware updates. Some older Fanvil models, such as the original X1, X3 and X5, are on 3CX’s legacy list and should be replaced rather than reused.
No. 3CX’s apps for Windows, Mac, web, iOS and Android work as full extensions, so many teams use softphones with headsets and skip hardware entirely. Desk phones are still worth it for reception, anyone who spends most of the day on calls, or staff who prefer physical keys for transfers and seeing colleagues’ status.
Yes. Preferred-brand phones can be remotely provisioned through the vendor’s redirection service, so a phone can be shipped to a staff member’s home and set itself up when plugged in. Alternatively, staff use the 3CX desktop or mobile app with a headset. Either way they answer the business number on their usual extension.
Phones on 3CX’s legacy list can’t be provisioned from within 3CX, many no longer get firmware updates, and 3CX gives no support for them. They can sometimes be set up by hand, but features like BLF keys and the directory may be unreliable. 3CX itself advises against buying these models new or second hand.
Tell us how your team works and we’ll recommend, supply and configure 3CX-supported phones and headsets – reusing what we can.